Φ165-325mm Horizontal Forming Stand for OCTG Production Line,ERW Pipe Forming&Sizing Mill

Equipment Composition

The tube mill consists of Forming Section, Welding Section, Cooling Section, Sizing Section and Turks Head Section.

Layout

Forming→Feed in

↓

Break Down and Fin Pass

↓

Welding →Guiding→ Squeezing→ Weld part→External Scarfing

↓

Water Cooling

↓

Sizing

↓

Turks Head

Product Introduction

Overview

Our Horizontal Forming Stand for OCTG Production Line equipped with a quick-change system acts as the core forming unit for high-frequency ERW tube production lines. It progressively forms incoming steel strip into a closed tubular shape through step-by-step roller deformation. The butted strip edges are fused by a high-frequency induction welder to produce robust weld joints with outstanding service durability. Immediately after welding, the tubes are transported to the cooling section for regulated heat dissipation. Subsequent sizing stands precisely calibrate outer dimensions to satisfy stringent tolerance requirements, while downstream Turks Head assemblies conduct profile optimization and preliminary straightening treatment. The final output consists of square and rectangular tubes featuring consistent dimensional uniformity, exceptional straightness, and superior overall geometric accuracy.

Conventional Forming(W Forming)

This design features enhanced maintainability and operational convenience, while effectively improving on-site safety.

High-precision forming stands adopt mechanical shaft expansion for roll shaft connection, ensuring outstanding dimensional accuracy of pipe diameters.

It delivers superior performance and maximizes production throughput. This solution not only boosts production speed, but also reduces equipment wear and tear to extend the service life of the machinery.

Flexible Forming(FF/FFX)

It not only cuts down roll replacement time significantly, but also reduces roller costs by 40–60%.

Rollers are compatible for producing round and square tubes within a certain size range on the same production line, eliminating frequent replacements for different specifications.

By automating multiple procedures in the tube forming process, FF/FFX technology minimizes manual work, effectively lowering labor costs and reducing human error.

Direct Forming(DFT)

It delivers excellent flexibility. Tube dimensions within the mill’s size range can be adjusted without roll replacement.

Full automation of line operation and roll adjustment cuts labor requirements, boosts productivity, and lowers inventory and associated costs.

Equipped with a built-in recipe database and mobile touch screen, the system enables one-click automatic adjustment of roll angles and positions during product changeovers.

Quick Change System

During product changeover, the entire shaft assembly can be lifted from the horizontal stand. Replacement takes only minutes rather than hours.

The universal shaft is automatically engaged and disengaged by hydraulic cylinders. This allows rolls to be prepared, replaced and adjusted offline without halting production.

While offline roll preparation is underway, a pre-assembled spare shaft assembly can be mounted onto the horizontal stand to finish the changeover. This quick-change system drastically cuts machine downtime.

Specifications

Model╲Spec.	Size(mm)	Thickness(mm)	Forming Method	Roll Quick Change
ZJ-GH32	Φ10-32	1.1-2.25	W	Roller changing trolley
ZJ-GH50	Φ12-50	1.2-2.75	W	Roller changing trolley
ZJ-GH76	Φ32-76	1.5-3.5	W	Rafted System
ZJ-GH89	Φ32-89	1.5-3.75	W	Rafted System
ZJ-GH114	Φ40-114	1.5-4.0	W	Rafted System
ZJ-GH140	Φ48-140	1.5-5.0	W	Rafted System
ZJ-GH165	Φ76-165	1.8-6.0	W/DFT	Rafted System
ZJ-GH219	Φ89-219	2.0-8.0	FF/DFT	Shaft Assembly
ZJ-GH273	Φ114-273	3.0-10.0	FF/DFT	Shaft Assembly
ZJ-GH325	Φ165-325	5.0-14.0	FF/DFT	Shaft Assembly
ZJ-GH355	Φ165-355	5.0-15.0	FFX/DFT	Shaft Assembly
ZJ-GH406	Φ219-406	6.0-16.0	FFX/DFT	Shaft Assembly
ZJ-GH457	Φ219-457	6.0-18.0	FFX/DFT	Shaft Assembly
ZJ-GH508	Φ273-508	6.0-20.0	FFX/DFT	Shaft Assembly
ZJ-GH610	Φ273-610	6.0-21.0	FFX/DFT	Shaft Assembly
ZJ-GH660	Φ325-630	6.0-22.0	FFX/DFT	Shaft Assembly
ZJ-GH711	Φ325-760	8.0-22.0	FFX/DFT	Shaft Assembly

About GH-Petro

GH-Petro supplies customized ERW & OCTG pipe mill solutions.We combine domestic craftsmanship and international leading technologies to deliver high-quality equipment and reliable services.

Request a Quote

Order Process

1️⃣ Send Your Inquiry
Tell us your product needs and order details.

2️⃣ Confirm the Solution
We recommend the right product and confirm the price.

3️⃣ Production & Quality Check
We arrange production and check the quality before delivery.

4️⃣ Shipping & Support
We ship the goods and provide after-sales support.

Simple. Fast. Reliable.

Frequently Asked Questions

What types of pipes mill do you supply?

We are a professional manufacturer and we could supply customized mill for ERW pipes and full-range OCTG pipes to meet your request,which include Entry Section,Forming&Sizing,Solid State HF Welder,Straightening Machine,Cold Flying Saw,End Facing Machine,Hydro-tester,UT Flaw Detection Machine,Threading Machine,Bucking Machine and Pipes Packing Machine.

What is your MOQ for Mill orders?

MOQ is flexible for us and one set is feasible.Of course our team also could supply you a complete solution according to your request.

Which standards do your pipe mill machines follow?

All kinds of our equipment are designed for producing pipes meeting API 5CT, API 5L, ASTM, EN, ISO and GB standards, suitable for oil & gas, pipeline, structural and industrial pipe applications.

Can you provide turn key ERW & OCTG pipe mill projects?

Yes. We offer full turn key solutions including process design, equipment manufacturing, installation guidance, commissioning, operator training and after sales service.

Do your machines support high grade OCTG production such as N80, L80, P110?

Absolutely. Our heat treatment and forming systems are specially engineered for high strength steel grades required for deep well oil and gas OCTG pipes.

What payment terms do you accept?

T/T, L/C at sight are available. Flexible payment terms can be discussed for large scale turn key projects.

What is your warranty period?

We provide 12 month warranty for core components from the date of shipment, with lifelong technical consultation and spare part supply service.

Related Products

Forming & Sizing Group, OCTG Production Line

Φ325-760mm High speed Forming Sizing Roll Stands for ERW Mill Line,OCTG Tube Forming Unit

High-speed OCTG ERW forming sizing roll stands with quick-change design support W, FF/FFX and DFT forming. They produce dimensionally precise square & rectangular tubes, reduce roll downtime, roller and labor costs and greatly increase production efficiency.

Forming & Sizing Group, OCTG Production Line

Φ273-610mm ERW Tube Cold Roll Forming Mill,ERW Pipe Mill Forming Sizing Unit for Oil Casing

Our quick-change OCTG ERW cold roll forming mill supports W, FF/FFX and DFT forming. It makes dimensionally accurate square & rectangular tubes, slashing roll change downtime, roller and labor costs while streamlining product switch and lifting production throughput.

Forming & Sizing Group, OCTG Production Line

Φ325-630mm DFT Direct Forming&Sizing Mill with Quick Change System,OCTG Pipe Mill Forming Sizing Unit

DFT Direct Forming & Sizing Mill with quick change system is core for HF ERW tube lines, supporting W, FF/FFX & DFT forming for round, square & rectangular tubes. It slashes roller costs by 40–60%, enables offline roll setup, automated recipe tuning, shortens changeover time and delivers high geometric precision with improved productivity.

Forming & Sizing Group, OCTG Production Line

Φ114-273mm ERW Tube Mill Forming Sizing Stands with Fast Roll Change,Forming & Sizing Group for OCTG

Core ERW forming sizing stands support W, FF/FFX, DFT forming & quick roll change for HF tube lines. It produces dimensionally precise round, square & rectangular tubes, slashes roller costs 40–60%, adopts offline roll setup and automatic recipe adjustment to reduce downtime and boost production efficiency.

Forming & Sizing Group, OCTG Production Line

Φ40-114mm Conventional Forming Sizing Stands for HF ERW Tube Mill,FFX Direct Forming for OCTG

FFX Direct Forming & Sizing Group serves as core ERW tube line unit, compatible with W, FF/FFX and DFT forming plus quick roll change. It fabricates high-precision round, square & rectangular tubes, cuts roller costs 40–60%, leverages offline roll preparation and automatic recipe tuning to slash downtime and lift production efficiency.

Forming & Sizing Group, OCTG Production Line

Φ273-508mm Custom ERW Forming Sizing Stand Group Manufacturer,Roll Forming Stand for OCTG Pipe

Our OCTG roll forming stand is core ERW mill equipment shaping steel strip with HF welding, cooling, sizing stands and Turks Heads for precise tube geometry. W, FF/FFX, DFT forming and quick change system cut roller & labor costs, slash product changeover downtime and raise production efficiency.

Forming & Sizing Group, OCTG Production Line

Φ219-406mm High Duty Round-to-square FFX Direct Forming,Forming Sizing Mill Assembly for OCTG Production

Our round-to-square FFX direct forming for ERW OCTG lines shapes steel strip with HF welding, cooling, sizing stands and Turks Heads for precise tube geometry. Available with W, FF/FFX, DFT forming & quick change system to slash roller/labor costs, shorten product changeover downtime and elevate production efficiency.

Forming & Sizing Group, OCTG Production Line

Φ89-219mm High Precision Forming Sizing Unit for OCTG Production Line,Fast Roll Change Tube Sizing Mill Stands

Our OCTG forming sizing unit shapes steel strip with HF welding, cooling, sizing stands and Turks Heads for precise tube geometry. Featuring W, FF/FFX, DFT forming & quick change system, it lowers roller and labor costs, slashes changeover downtime and improves overall ERW pipe production efficiency.

Cutoff, OCTG Production Line

Φ325-660mm/◻100-500mm Orbital Trajectory Milling Cut-off Unit,CNC Orbital Milling Pipe Cutoff for OCTG

Orbital Trajectory Milling Cut-off Unit adapts to ERW lines for high-speed cold cutting of small & medium steel tubes, compatible with flying cutoffs, ERW mills and OCTG casing & tubing lines. Shear structure with integrated cooling-lubrication removes heat via swarf, delivering precise burr-free square tube ends to boost line throughput and consistent premium mass production quality.

Cutoff, OCTG Production Line

Φ219-406mm/◻80-300mm Flying Cutoff Machine for OCTG Production Line,Milling Type Flying Cutoff

OCTG Flying Cutoff Machine customized for ERW lines delivers high-speed continuous cold cutting for small & medium steel tubes. Compatible with orbital milling cut-offs, ERW mills and full OCTG casing & tubing lines. Shear structure with integrated cooling-lubrication dissipates heat via swarf, creating burr-free precise tube ends to boost line throughput and steady high-quality mass tube production.

Cutoff, OCTG Production Line

Φ48-165mm/◻50-150mm Tube Cold Flying Saw for OCTG,Multi Blade Orbital Milling Cutoff

OCTG Tube Cold Flying Saw tailored for ERW pipe lines provides high-speed continuous cold cutting for small & medium steel tubes. Compatible with orbital milling cutters, flying cutters, ERW mills and full OCTG casing & tubing lines. Its shear structure with integrated cooling-lubrication dissipates heat via swarf, producing burr-free square pipe ends with precise dimensions to lift production efficiency and stable finished pipe quality.

Cutoff, OCTG Production Line

Φ76-168mm/◻60-130mm High Precision Flying Cold Saw,Cold Flying Saw for ERW Pipe Production Line

Our ERW cold flying saw realizes high-speed continuous cold cutting for small & medium tubes, compatible with orbital milling cutters and OCTG pipe lines. Its cooling-lubricated shear design dissipates cutting heat, producing burr-free precise cuts to lift line productivity and guarantee consistent high-quality finished pipes.

Cutoff, OCTG Production Line

Φ60-140mm/◻50-110mm Cold Flying Saw for Straight Seam Welded Pipe Mill,Flying Saw Clamping Mechanism for OCTG

ERW Cold Flying Saw delivers high-speed continuous cold cutting for small & medium-diameter tubes, compatible with orbital milling cutters, flying cut-off machines and OCTG production lines. Its cooling-lubricated shear design dissipates cutting heat, creating burr-free, distortion-free precise cuts to raise line productivity and finished pipe consistency.

Cutoff, OCTG Production Line

Φ165-273mm/◻60-220mm Profile Orbital Milling Cut Off for OCTG Production Line,Orbital Milling Type Cold Cutoff

Our Profile Orbital Milling Cut Off Machine is automatic inline flying cold cutting equipment for ERW, seamless pipe & OCTG lines. Better than traditional flying shears, it cuts running pipes without stops, delivering burr-free, distortion-free pipe ends free of heat-affected zones for various steel tubes.

Cutoff, OCTG Production Line

Φ32-108mm/◻30-75mm Tubes Cold Flying Saw Blade(TCT/HSS blade),Steel Pipe Cold Flying Saw for OCTG

OCTG Steel Pipe Cold Flying Saw cuts small & medium tubes at high continuous speed, compatible with ERW mills, orbital milling cutters and OCTG lines. Shear cutting with full cooling transfers heat to swarf, creating burr-free, distortion-free precise pipe ends to upgrade your mass production efficiency.

Cutoff, OCTG Production Line

Φ13-38mm/◻10-30mm ERW Mill Line CNC Flying Cold Saw,Cold Cut Flying Saw for OCTG Pipes

OCTG Cold Cut Flying Saw for high-speed continuous cold cutting of small & medium tubes, compatible with orbital milling cutters, flying cutoffs, ERW pipe mills and OCTG lines. Shear cutting with full cooling diverts heat to swarf, yielding burr-free, distortion-free precise pipe ends to lift mass production productivity.

Cutoff, OCTG Production Line

Φ325-762mm High Precision Orbital Milling Pipe Cutting for OCTG,Polar Coordinate Orbital Milling Cutoff

High Precision Orbital Milling Pipe Cutting is an in-line cold flying cutter for ERW, seamless and OCTG lines. It replaces flying shears & cold saws, performs continuous tracked cut-to-length cutting with burr-free, distortion-free, HAZ-free ends for multiple steel tubes and OCTG products.

Cutoff, OCTG Production Line

Φ165-325mm High Speed Cold Flying Saw For OCTG Pipe Cutting,ERW Tube Mill Flying Cold Cut Off Machine

Orbital Milling Cutoff is an automatic in-line cold flying cutter built for ERW, seamless and OCTG pipe lines. Replacing flying shears and cold saws, it delivers continuous tracked fixed-length milling with burr-free, distortion-free, HAZ-free ends for carbon, alloy, stainless steel and OCTG pipes.

Cutoff, OCTG Production Line

Φ114-219mm API Pipe Orbital Milling Cutoff Machine for OCTG,Wholesale ERW Orbital Milling Cutoff Unit

Orbital Milling Cutoff is an automated in-line cold flying cutting unit for ERW, seamless pipe & OCTG lines. It replaces flying shears and cold saws, using planetary orbital milling for uninterrupted tracked cut-to-length cutting, producing burr-free, distortion-free, HAZ-free ends for carbon, alloy, stainless steel & OCTG pipes.

Cutoff, OCTG Production Line

Φ63-114mm ERW Tube Mill Cold Flying Saw,High Speed In-line Cold Flying Saw for OCTG Casing Tubing

Our single cold saw blade suits high-speed continuous cold cutting for small & medium metal tubes. Compatible with orbital milling cutoff, flying cutoff machines, ERW pipe mills and OCTG casing & tubing lines. Featuring full cooling lubrication, it ensures burr-free, distortion-free, high-precision tube cutting to improve overall pipe production efficiency.